PS
3D type, few joints, simple
SERIES
The PS Series is a probe positioner that maintains contact between oscilloscope probes and mounted boards.
It enables quick, stable, and hand-free probing of boards in various installation conditions, such as horizontal and vertical.
The number of joints has been reduced from that of our PV series, resulting in a simple and easy-to-handle structure.
(The number of fixing points per arm is 3 compared to 6 in the PV series.)
Features
It can also be used to contact a board that is still in a rack or vertically upright while built into a product.
Micogic's 3D positioners feature long stroke springs for extremely stable probing.
・Stable contact pressure due to unique tip structure with long stroke spring structure.
(The tip structure is the same as that of the PV series.)
・Probing is easier than with the PV series.
If the object to be measured is of a size that does not require fine adjustment, probing can be performed with a simple operation.
Teledyne LeCroy
(Teledyne Japan K.K.)
Testimonials
It is very easy to use, holds both the TDR probe and the broadband differential probe firmly, and we had no problems at all.
We were particularly concerned about the tension of the two coaxial cables connected to the TDR probe, but we found that we could recommend it to our users because it could be fixed stably and measure with good repeatability.
Specifications and models
| Model | L(mm)※ | Arm Configuration |
|---|---|---|
|
PS-200
|
200 | 1 arm (standard) |
※PS series has one type with arm length of 200mm2.
The base and tip structure are the same as the PV series.
PS-200
PS-200 mounted on a desk via optional C-clamp
Brochures and instruction manuals
Price and delivery time
Delivery time for all PS Series models is usually 2-3 weeks.