PF
For FET probes, etc.
SERIES
Special Feature
With a simple lift-and-drop operation that takes only a few seconds, very stable probing to the measurement target is possible.
The included loupe always magnifies the area around the probe tip, enabling probing of the smallest measurement target.
Large-diameter probes can also be mounted by connecting the attached spare band.
Contact pressure of approx. 90gf ensures stable hand-free probing.
Specifications and Models
| Type | L(mm) ※1 | H(mm) | Arm configuration |
|---|---|---|---|
|
PF-400
|
400 | 175 |
1 arm (large)
|
|
PF-320
|
320 | 158 |
1 arm (standard)
|
|
PF-270
|
270 | 145 |
1 arm (small)
|
|
PF-400W
|
400 and 320 | 175 |
2-arm (large + standard)
|
|
PF-320W
|
320 and 270 | 158 |
2 arms (standard + small)
|
※1 Arm length (L) is the length from the center of the base when the arm is fully extended.
In the case of PF-400, the measurement range is within an approximate radius of 400 meters.
※2 The arm type comes with two arms.
Two arms are set with two arms of different lengths for ease of operation.
For example, PF-400W has two arms with L=400 and L=320.
This allows each arm to be operated independently without interference.
PF-270
PF-400W
Installation of hard gold-plated probes
The PF series can be equipped with a hard gold-plated probe (sold separately).
This enables the same usage as that of the PA series.
Please refer to Option (MP-2) for the hard gold-plated probe.
Attach the hard gold-plated probe using the wrench and knob provided with the MP-2
More complicated handling is possible than when using the PA series.
Pricing and Delivery
The delivery time for the PF series is usually one week for all models.