O
PTION
Probe Positioner Option
MP-2
MP-2 is a set of hard gold-plated probes for Micogic probe positioners.
This set includes two hard gold-plated probes that are standard equipment for the PA and PL series.
Use them as replacement probes for the PA and PL series.
It can also be attached to the tip of the PF series to take out signals from tiny parts.
For details, please refer to the MP-2 instruction manual below.
MP-3
MP-3 is a hard gold-plated probe set exclusively for Micogic's PV and PS series probe positioners.
Unlike the 2D type, the PV and PS series probes use a stroked shaft structure, so when the MP-2 is attached, the direction of the needle tip will be misaligned by about 90 degrees. Although it is possible for the user to adjust the probe set, there is a risk of needle breakage or damage.
MP-4T
MP-4T is a hard gold-plated probe with a thin tungsten needle of Φ0.5mm.
It is more suitable for probing small and delicate elements and devices than the standard product (MP-2).
The tungsten part will not be hard gold plated from July 2024 shipment.
Please refer to the linked instruction manual.
MP-5T
MP-5T is a tungsten probe set exclusively for Micogic's 3D type positioner PV and PS series.
It is suitable for probing smaller and more delicate elements and devices than MP-3 with standard needles.